Technical Information MRA-100

MRA-100 is a semi-permanent water-based release system designed for moulding operations when non- transfer of release agent, high temperature stability, high degree of slip, and abrasion resistance of the release film are important.
MRA-100 is water thin liquid and ready to use. The release system becomes functional after cure. The release film is micro thin and stable until 260°C.
MRA-100 adheres to mould surfaces and provides multiple releases with virtually no transfer to moulded parts.
MRA-100 reduces build-up on moulds when applied according to instructions.

Properties:

Application Field:

Rubber, all kind of rubber-types and rubber moulding. Especially suitable for the production of tires.

Advantages:

1.Water based
2.Easy to apply
3.Provides true multiple releases between application
4.Prevents build up on the moulds
5.Non greasy, non contaminating coating
6.Excellent performance of produced parts (dry, uniform, semi-gloss finish) 7.Universal for all rubber-types
8.Reduced knit lines
9.Eliminates or at least reduces the need of outside paint

Application:

Thoroughly clean the mould. Apply at least two uniform, thin coats before it goes to production. Allow a short drying time between each coat.
Reapply a light coat of MRA-100 at process temperature when required, to maintain desired release.

Further Information:

Product technical information and data is based on the best information available and does not constitute or imply a warranty or patent infringement of any kind. The user is responsible for testing product suitability prior to use in production.