G483 XC-33M Mold Release-XC-33M氟素水性半永久食品级硅橡胶脱模剂

G483

XC-33M Mold Release

Stoner® G483 XC-33 Fluorochemicalis a semi-permanent, non-silicone release designed to exhibit outstanding release characteristics with no transfer. XC-33 Release Agent is supplied as a water dilutable emulsion which allows for a thin, uniform release film to be deposited on a wide variety of substrates. This low-odor release is ideal for compression molded silicone rubber and more.

G483 XC-33 Fluorochemical ADVANTAGES:

Saves time – lets you remove molded parts from molds quickly and easily
Consistently clean releases produce less scrap and greater first quality output
Low build-up for more parts between mold cleanings
May be diluted with water for maximum cost efficiency
Safe for your workers and end-users, XC-33 is listed under FDA Sec. 21 CFR 176.170 (a) (5) – safe for use in selected food contact items and non-hazardous forshipping
Contains no chlorinated solvents such as 1,1,1 trichloroethane or methylene chloride
Colorless and non-staining

G483

XC-33M脱模剂

Stoner®G483 XC-33 氟素是一种半永久性非硅酮脱模剂，其设计具有出色的脱模离型特性，无需转移。 XC-33脱模剂以水稀释乳液形式提供，可在各种基材上沉积薄而均匀的脱模膜。这种低气味释放剂非常适用于压缩模塑硅橡胶等。

G483 XC-33氟素脱模剂的优势：

节省时间 - 让您快速轻松地从模具中取出模制零件

始终如一的清洁版产生更少的废料和更高的优质产出

在模具清洁之间积聚更多的部件

可以用水稀释以获得最高的成本效率

XC-33被FDA美国食品药品管理局（FDA Sec。）列为安全工作人员和最终用户。 21 CFR 176.170（a）（5） - 安全用于选定的食品接触物品和非危险性物品

不含氯化溶剂，如1,1,1三氯乙烷或二氯甲烷

无色和不染色

021-56830399

G483

XC-33M Mold Release