G481 RR-5 HOTWB Mold Release-水性硅树脂半永久性橡胶脱模剂

G481

RR-5 Hot WB Mold Release

RR-5 Hot WB is a silicone resin emulsion, semi-permanent release. RR-5 Hot WB gives outstanding results in very tough release applications. Applied to a clean mold, it forms a smooth, continuous film with good adhesion to the mold surface.

Benefits:

Multiple releases gives increased productivity
No transfer post-finishing problems virtually eliminated
No knit line, cracks, or splits low scrap rate
Very low build-up -- more production time between mold cleanings
No VOC's or ODC's present carrier is water only

G481

RR-5 HOT WB脱模剂

RR-5 Hot WB是一种硅树脂乳液，半永久性脱模剂。 RR-5 Hot WB在非常严格的发布应用中提供出色的结果。应用于干净的模具，形成一个光滑，连续的薄膜，对模具表面具有良好的附着力。

优点：

多次脱模，可提高生产力

没有转移，后期处理问题几乎消除

没有针织线，裂缝或拆分率低的废品率

非常低的积聚 - 模具清洁之间的生产时间更多

没有VOC或ODC的现有载体仅为水

021-56830399

G481

RR-5 Hot WB Mold Release